Tommy Knife® TK-H CPM 3V Sculpted Knife with G10 Grip
Regular priceSale price
Tommy Knife® Model: TK-H (Serial # XM-H9LTV)
*The knife you see in the picture is the actual knife.
Blade material: CPM 3V
Blade design: Custom to model (flat edge)
Edge finish: V grind with Sculpting
Blade finish: Gunmetal
Grip material: G10 - black/gray layered
Grip finish (style): Caveman
Grip thickness: 1/4" per side
Sheath material: Kydex with Tek-Loc adjustable and contoured. Accommodates belts from 1.25" - 2.25"
Overall Length: 7 1/8th"
Blade Length: 3.5"
Cutting edge length:
Blade Thickness: 0.190"
About the Tommy Knife®TK-H: A mid sized fixed blade. A custom design by Tom Clarke, often carried and used in pairs. They are offered in both a right and left chisel grind as well as V grind. The entire Tommy Knife line is designed for a forward or reverse grip application.
About the Handle: The handles were designed in a way that when you form a grip the foreign debris is pushed out allowing a secure grip of skin against the material. There are no wraps or acute angles where mud or debris could accumulate which could interfere with a secure solid grip. If foreign debris is not able to escape from a handle, often seen with wraps or a divot inlay, a smooth and slippery surface will result and error is likely.
Blade Material: This Tommy Knife custom made using CPM 3V, which meets the three major balancing factors: toughness (impact), wear resistance (edge retention) and corrosion. The toughness scale of CPM 3V is superior to all other blade material most often used. CPM 3V is an alloy so it will not corrode like standard carbon steel. The Wear Resistance is comparable to CPM S30V.
*Custom made, each knife is a unique final design of the sculpted grip, interrupted blade surfaces, and cutting edge due to the fact that this can only be done one knife at a time by hand.